Hipot & Safety Testers

Quality and Compliance Testing Made Easy

Hipot testers or dielectric withstand testing instruments are used for conducting electrical safety tests on electrical components and products to make certain they are in compliance with IEC, UL, TUV, CSA, EN, and other electrical safety requirements. In addition to general product and component testing, Chroma can help solve complex medical safety testing (60601-1) ensuring human safety and product reliability. New hipot and electronic safety test instruments (EST) purchased in North America are backed by a 2-year standard warranty.

Hipot and Ground Bond Testers

Hipot testers determine the suitability of the dielectric or insulation barrier between hazardous and non-hazardous parts. Hipot testing (dielectric strength testing) appears in nearly every product safety standard and is a fundamental test used to check a fully assembled product as it exits the production line.

Sentry Hipot Tester AC/DC/IR

Chroma 19070

AC or AC / DC / IR

1

AC: 0.05~5kV
DC: 0.05~6kV

Compact, lightweight and low cost safety testers for electronic components

Guardian Multi-Channel Hipot Tester

Chroma 19020

AC or AC / DC / IR

10 (up to 100)

AC: 0.05kV~6kV
DC: 0.05kV~8kV

Measure the hipot leakage current of all channels at the same time and conduct tests on up to 100 DUTs simultaneously

Guardian Hipot Tester AC/DC/IR/SCAN

Chroma 19050

AC / DC / IR
or AC / DC / IR / SCAN

1, 4 or 8

AC: 0.05~5kV
DC: 0.05~6kV

Advanced digital hipot testers with load and line regulations that help ensure measurement integrity, and Multi-step capability allows users to perform multiple tests in sequence

Guardian Ground Bond Tester

Chroma 19572

AC: 3~45A

0.1~510 mΩ

50Hz / 60Hz

Provides high current testing of ground continuity between chassis and power cord ground on a wide variety of electrical products and appliances

Advanced Hipot Analyzers

Chroma’s advanced hipot testers are used in quality assurance sample inspection testing, manufacturing testing, and development validation. Some example products are: Power cords, Household appliances (IEC 60335), Information technology products (IEC60950), Medical equipment (IEC60601), Lab/testing equipment, Video (IEC60065), and EMI filters.

Electrical Safety Analyzer

Chroma 19032

AC: 0.05~5kV
DC: 0.05~6kV

DC: 12mA , AC: 40mA (19032)
DC: 25mA , AC: 100mA (19032-P)

0.1MΩ~50GΩ / 1kV max

The test-to-any-standard electrical safety analyzer. Easy, precise testing. A must for medical device testing and IQOQ compliance.

Guardian Hipot Analyzer

Chroma 19055

AC: 0.05~5kV
DC: 0.05~6kV

AC: 5kV/100mA (4kV/120mA)
DC: 25mA

0.1MΩ~50GΩ / 5kV max

Designed for hipot tests and analysis of transformers, motors and other electronic components

Guardian Hipot Analyzer

Chroma 19056/19057

AC: 0.1~10kV (19056)
DC: 0.1~20kV (19057)

AC: 20mA (19056)
DC: 10mA (19057)

0.1MΩ~50GΩ / 5kV max

Provides high withstand voltage test and analysis for optical couplers, HV relays, HV switches, and PV modules components, which have better insulation capability

Wound Component Hipot and Impulse Winding Testers

Quality verification testing for wound components including EV motors, servomotors, ascension motors, stators, transformers, heaters and solenoid valves. The Impulse Winding Test (WPT) discovers potential defects such as layer short, corona, and/or partial discharge which can go undetected during early phases of design and production.

Hybrid Wound Component EST Scanner

Chroma 19035

AC / DC / IR / DCR -8CH

8 (up to 40 opt.)

AC: 0.05~5kV
DC: 0.05~6kV

Powerful functions for Flashover detection and Open/Short Check (OSC) with programmable voltage and time parameters for various characteristics of DUTs

Impulse Winding Tester

Chroma 19305

10bit / 5ns (200MHz)

More than 10uH

LAN, USB, and RS232

Specifically designed to test winding components using a high-voltage charged micro capacitor and the coil under test, forming an RLC parallel resonant circuit.

Partial Discharge Tester

Chroma 19501-K

Partial Discharge Test
1-200 pC

0.10 kV~10.00 kV, steps 0.01 kV

LAN, USB, and RS232

Specifically designed for testing high voltage semiconductor components and high insulation materials.

Power Inductor – Impulse Winding Tester

Chroma 19301A

Impulse Winding Test
0.1uH~100uH

10V~1000V

LAN, USB, and RS232

Specifically designed for wound component tests, utilizes a high voltage & low capacitance capacitor (low test energy) in parallel with a coil to form an RLC resonant

Wound Component EST Analyzer

Chroma 19036

AC / DC / IR /
Impulse (surge) / DCR

10 (up to 40 opt.)

AC: 0.05~5kV
DC: 0.05~6kV

Impulse winding test imposes a non-destructive, high speed and low energy voltage impulse on the device under test for analysis and comparison

Battery Cell Safety Testers

A battery cell insulation tester accurately measures leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. The tester includes partial discharge (PD) and flashover detection to identify defects and potential hazards. Our Surge Tester is designed for testing the insulation quality between the positive and negative plates of a lead-acid battery cell.

Battery Cell Insulation Tester

Chroma 11210

Up to 1KV(DC)

50mA max.

0.01kΩ~10 TΩ [kΩ, MΩ, GΩ]

Accurately measure leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials.

Battery Cell Surge Tester

Chroma 19311

0.10 kV~6.00 kV, 0.01 kV

≥ 3.00kV @ 50nF

200MHz

Designed for testing the insulation quality between the positive and negative plates of a lead-acid battery cell

Battery Cell Safety Testers

A battery cell insulation tester accurately measures leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. The tester includes partial discharge (PD) and flashover detection to identify defects and potential hazards. Our Surge Tester is designed for testing the insulation quality between the positive and negative plates of a lead-acid battery cell.

High Voltage Safety Enclosures

Designed to provide a safe environment for Hipot testing devices, these high voltage safety enclosures act as personal protective equipment (PPE), reduce the hazard of high voltage discharge and safeguard operators from the dangers associated with High Potential Testing. These come equipped with a magnetic safety interlock switch and chassis ground connection that must be wired from the safety tester to the safety enclosure for safe operation.

High Voltage Safety Enclosures

Electrical Safety Test Application Notes

Browse application notes on the topic of Electrical Safety Testing. Chroma’s application notes provide insight and context to assist test engineers with a particular technology, instrument, or application for their bench-top, R&D, design verification and/or ATE requirements and specifications.