Programmable Benchtop DC Power Supply
Chroma 62000L
108W / 150W
0~60V
0~7A
Provides high quality yet cost effective programmable benchtop DC power, designed to meet the stringent requirements of the next generation of power electronics
Programmable DC Power Supply
Chroma 62000P
600W, 1200W, 2400W, 5000W
0~600V
0~120A
Constant power operating envelope, precision readback of output current and voltage, output trigger signals, and the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations
1U Programmable DC Power Supply
Chroma 62000E
1.7kW/3.4kW/5kW
0~1200V
22.5A max.
Provides a single channel of 1.7kW, 3.4kW, 5kW and three channels of 1.7kW output configured in 1U chassis
Solar Array Simulator DC Power Supply
Chroma 62000H-S
2kW/5kW/10kW/15kW
150V/600V/1000V & 1800V
0~40, 1500A (System)
Provides programmable IV curve simulation with an incredibly fast transient response for MPPT performance evaluation on PV inverter devices
Programmable DC Power Supply
Chroma 62000H
5kW/10kW/15kW
0~1000V
0~375A
Provides 2kW to 150kW of power, precision readback of output current and voltage, output trigger signals, create complex DC transients waveforms to test device behavior with voltage deviations
Ultra-High Stability DC Power Supply
Chroma 62075H-30N
7.5kW
0~30V
0~250A
Provides a stable DC output current source and power for synchrotron applications, offering an advanced 250A/30V ultra high-stable ±10 ppm with high efficiency and high power factor.
Bidirectional DC Power Supply + Regenerative Load
Chroma 62000D
6kW/12kW/18kW/36kW/45kW
0~100V/600V/1200V/1800V/2000V
0~540A
Bidirectional DC Power supplies with high accuracy and the widest operating range provide better control for testing bidirectional EV components, batteries, and PV inverters.
Modular DC Power Supply
Chroma 62000B
up to 1.5kW per module; up to 120KW per system
1~150V
up to 2000A (System)
Unique features include a N+1 redundancy, high power densities, hot-swappable maintenance, remote ON/OFF and programmable control via the CAN bus for Burn-in and plating/electrolysis applications
100Hz-50kHz LCR Meter
Chroma 11021/11021-L
0.25V / 1V (11021)
50mV / 1V (11021-L)
0.1% (11021)
0.2% (11021-L)
75mS
For use in both component evaluation on the production line and fundamental impedance testing for bench-top applications
16CH Battery Cell Simulator
Chroma 87001
16
Max. 10A
1.2kVA
Switch fast charge and discharge current in current source mode without any interruption
Missing
Low Power Programmable AC Source
Chroma 61600
500VA / 1.5kVA / 2kVA / 4kVA
0~150V/0~300V/Auto
DC, 15Hz~1kHz
Delivers pure, instrument grade AC power at very low cost with output voltage from 0 to 300VAC, and frequencies from 15 to 1000Hz
Missing
Low Power Programmable AC Source with Transients
Chroma 61500
500VA / 1.5kVA / 2kVA / 4kVA
0~150V/0~300V/Auto
DC, 15Hz~1kHz
Equipped with a host of powerful features: power line disturbance (PLD) simulation, programmable output impedance, comprehensive measurement functions, waveshape synthesis and regulation test software
3-Phase Programmable AC Source
Chroma 61700
1500VA~12000VA
150V/300V
DC, 15~1.2kHz
Delivers pure, 5-wire, 3-phase AC power. It includes low power rating models at very low cost, simulates various input conditions of UUT for R&D and QA, and is suitable for commercial applications from laboratory testing to mass production.
Programmable AC Power Source
Chroma 61509, 61508, 61507, 61609, 61608, 61607
3kVA / 4.5kVA / 6kVA
0~175V/0~350V/Auto
DC, 15Hz~2kHz (5kHz opt.)
The right solution to meet complex single and three-phase requirements with the ability to simulate AC line conditions and measure critical product characteristics during testing.
50Hz-100kHz LCR Meter
Chroma 11022/11025
10mV~1V , step 10mV
0.1%
21mS
Programmable test signal level settings are from 10mV to 1V in steps of 10mV, and the VM/IM signal level monitor functions allow you to evaluate your devices at the level you specify
Battery Cell Insulation Tester
Chroma 11210
Up to 1KV(DC)
50mA max.
0.01kΩ~10 TΩ [kΩ, MΩ, GΩ]
Accurately measure leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials.